How To Load A Dishwasher
How To Load A Dishwasher

How To Load A Dishwasher Properly

Posted on

If you ever wonder how to correctly load a dishwasher, then you’ve come to the right place for we have the tutorial on the matter to show you! Learn how to load a dishwasher properly so you don’t accidentally break your plates and glasses. Though doing such thing is a no-brainer task, but performing it accurately can surely make your dishes come out cleaner.

Basic rules to remember

Homeowners should remember this simple, yet very useful rule: if the dishes are going to sit in the machine all day, pre-rinse them! However, you can just scrape off the food and leave it at that if you are running a cycle immediately.

You need to secure all the plastics as well for there might be blasts of water that will flip over these pieces and consequently fall onto the heating element. Thus, causing them to melt.

Lastly, you should never stack items, ever! It’s because the water spray won’t be able to clean and reach the dish located on top.

Strategic loading

How To Load A Dishwasher
How To Load A Dishwasher

Here’s the ‘algorithm’ on how to load a dishwasher:

  • The plates should go into the slots in the bottom section of the machine. They need to be faced toward the centre as well and should they lean, they must lean downwards and inwards. This is because the jets, tubes as well as rotating devices spray water from the centre outward; up and outwards from the bottom; and down and outwards from the top of the unit. Additionally, all surfaces better be separated so that the stream of water coming out of the sprayers can have access to all of them.
  • All the glasses, bowls and cups should be placed at an angle. Such method will allow the water to enter from below while simultaneously not taking too much room. The bowls should be stacked on an incline neatly as well for this technique provides a way for the washing solution to reach inside the bowl. Not only will this also allow them to drain but there’s more space to fill in.
  • The top rack is recommended for Tupperware and any kind of plastics. Typically, the heating element is located on the bottom of most dishwashers so, placing them in the bottom rack will definitely cause them to warp or melt.
  • The bottom section of the machine is where the various pans and pots should be placed with open-side down. Note that you should never overload your dishwasher. If it’s necessary, hand wash huge items or simply run the dishwasher a second time.
  • When it comes to cutlery, separation is key. The handle of the cutlery basket must not stay up and you must separate pieces as much as possible. The cutlery must be distributed loosely. The soiled surfaces of the forks and spoons must be positioned apart so that the water can reach them all. Long pieces of cutlery must be laid down in the upper basket as they have the potential to block the spray from nozzles, rotating devices and tubes. Dangerous sharp items such as knives should be washed by hand. Moreover, wood utensils and wood handled items are never to be cleaned in a dishwasher!

Lastly, the correct way on how to load a dishwasher is to never stock up on too much detergent. Buying only what one can use up in two months is a good rule of thumb!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.